Utility 3000R
Serving the temperature-controlled transportation industry for over 40 years, Utility has almost perfected refrigerated transportation with the 3000R. Maximize payload and rest easy with its durability. Learn more about the 3000R below.
VIEW OUR STOCK INVENTORY!
Utility 3000R
The 3000R remains the #1 selling refrigerated van in North America because Utility's philosophy of continuous improvement ensures optimized thermal efficiency and maximized performance.
Utility Barrier Door®
Versitex®-Utility VR2 lining
Key Features
- Foam-in-place insulation
- Extruded aluminum duct floor
- Hendrickson® ULTRAA-K™ 40K air ride suspension & slider system
- Advanced trailer roll stability
- Stainless steel rear door frame
- Integrated heavy-duty 10" high wearband
- D.O.T. rated I.C.C. bumper
- 5½" deep extruded aluminum crossmembers
- Support leg bracing
- Corrosion protection
- Impact-absorbing rear gusset
- ConMet Preset Plus® premium wheel end system
- Unique tensioned roof design
- Heavy-duty kingpin section
- 100% LED lighting
- 100% soldered main harness
- Stainless steel covered extruded aluminum corner posts
- Diagonal reinforcing gussets on slider rails
- Lining corner closures
- Thermal barriers
- Ultra Road Shield™ Plus (URS+)
- USS-120A-4 Aerodynamic Side Skirt
Available Options
- Air return bulkheads
- Recessed logistic track
- Clearance light packages
- Utility Aerodynamic Tail 2 (UAT2)
- Air disc brakes
- Bottom rail protectors
- Electrical system options
- Severe service high impact linings
- Stainless steel I.C.C. bumper
- Stainless steel wingplates
- Custom wearbands
- Stainless steel electropolished lock rods
- Stainless steel side skin
- Customized floor systems
- Factory-installed refrigeration units and accessories
- Pintle hooks/doubles
- Diamond pattern stainless steel door skin
- Electric stand-by refrigeration units
- Factory-installed decals
- Anti-dock walk devices and dump valves
- Shore power plug at rear
- Grab handles
- Side and rear steps
- LED dome lights
Specifications
| 01-03 DIMENSIONS AND DECK TYPE | |
|---|---|
| Gross vehicle weight rating (GVWR) | |
| 65,000 lb | |
| Payload capacity | |
| 55,000 lb | |
| Inside height | |
| 104⅛" | |
| Inside width | |
| 97½" at wearband | |
| Overall length | |
| 53' 0" | |
| Overall height | |
| 13' 6" on 46½" height 5th wheel | |
| Overall width | |
| 102⅜" | |
| Deck type | |
| Straight | |
| 04 FRONT SUBFRAME | |
| Front subframe | |
| 4¼" deep box beam design | |
| Approach plate | |
| 9 ga. high strength steel full width | |
| Kingpin location | |
| 36" from front | |
| Kingpin plate | |
| 3 ga. high strength steel full width | |
| Kingpin type | |
| AAR hardness cruciform | |
| Cover plate | |
| Extruded aluminum on front face of approach plate | |
| 05 SUPPORT LEG AND ASSEMBLY | |
| Support legs | |
| Jost® model A401 enhanced 50,000 lb capacity | |
| Support leg location | |
| 105" from center line of kingpin to center line of support legs | |
| Support leg shoe type | |
| 10" × 10" ultra low profile cushion foot | |
| Support leg bracing | |
| Bolt-on cross-bracing with 7 ga. 3¼" deep high strength steel channels | |
| Support leg crank location | |
| Roadside of support legs | |
| 06 CROSSMEMBERS AND RAILS | |
| Bottom rails | |
| 11" deep heavy-duty extruded aluminum; tapered front and rear | |
| Crossmembers front subframe to legs | |
| 4" aluminum I-beam crossmembers with 4 rivet end clips on 12" center line | |
| Crossmembers legs to rear subframe | |
| 5½" aluminum I-beam crossmembers with 4 rivet end clips on 12" center line | |
| Crossmembers over rear subframe | |
| 4" steel I-beam crossmembers with 4 rivet end clips on 12" center line with standard reinforcement of an additional crossmember in rear 34" | |
| Crossmembers over support legs | |
| (5) 4" steel I-beam crossmembers with 4 rivet end clips on 12" center line over legs | |
| 07 REAR SUBFRAME | |
| Rubber dock bumpers | |
| 1 pair | |
| Vertical and horizontal I.C.C. bumper | |
| D.O.T. high strength steel vertical with non-slip 7" deep horizontal | |
| 08 SUSPENSION, AXLES AND ACTUATION | |
|---|---|
| Hendrickson air ride system with integral axles | |
| Hendrickson® ULTRAA-K air ride/slider system with 49" axle spacing | |
| Slider suspension location | |
| 70" rear and 166" forward for 96" of slider travel | |
| Slider pin release mechanism | |
| Hendrickson® Quik-Draw® air-operated slider repositioning system | |
| Slack adjusters | |
| Bendix® Versajust® automatic | |
| Air actuation system | |
| 1 tank with spring brakes | |
| Air brake chambers | |
| Bendix® EnduraSure™ 3030 | |
| Air ride dump valve | |
| Hendrickson® automatic | |
| Anti-lock brake system (ABS) | |
| Bendix® TABS-8 2S/1M with TRSP | |
| Axle spindle nuts | |
| ConMet® included with Preset Plus® | |
| Brake lining style | |
| Hendrickson® HXS brake lining style | |
| Hub piloted system with outboard drums | |
| 10 stud hub-piloted system with outboard cast drums with 16½" × 7" brakes included with ConMet Preset Plus® | |
| Hubcaps | |
| Federal-Mogul “non-vented” | |
| Oil seals | |
| ConMet® included with Preset Plus® | |
| Wheel bearing lubrication | |
| Mobilube HD Plus 80W-90 oil | |
| Wheel bearings | |
| ConMet® included with Preset Plus® | |
| 09 FRONT WALL | |
| Front panels | |
| .040" aluminum, pre-painted white with Ultra Road Shield™ Plus (URS+) | |
| Front wall posts | |
| 1" J-shaped extruded aluminum post with 2 additional 3¼' deep steel reefer unit support posts | |
| Front corner post | |
| .080" extruded aluminum 4¾" radius | |
| Front corner post inserts | |
| Stainless steel | |
| Front top rail | |
| Extruded aluminum wraparound | |
| Gladhands and receptacle location | |
| Gladhands and receptacle mounted on an aluminum extrusion offset to roadside | |
| Prep for front mount refrigeration unit | |
| Without electric standby | |
| Refrigeration unit opening cover | |
| Sheet metal cover includes sealant full perimeter of opening | |
| 10 SIDE WALL | |
| Side panels | |
| .040" aluminum flat side panels, pre-painted white with Ultra Road Shield™ Plus (URS+) | |
| Side posts | |
| 1" J-shape extruded aluminum posts with 16" maximum center line from front to rear of support legs with 24" center line legs to rear; 2 additional posts each side over front subframe | |
| 11 ROOF | |
| Roof skin | |
| .025" one-piece aluminum coil | |
| Roof bows | |
| 1" extruded aluminum J-shaped bows on 48" center lines | |
| Top rails | |
| 6⅜" heavy-duty extruded aluminum | |
| 12 REAR CASE AND DOORS | |
| Rear case & buckplate material | |
| Stainless steel for satin finish swing doors | |
| Rear case corner posts & header | |
| Stainless steel for satin finish swing doors | |
| Rear door hinge material | |
| Non-polished aluminum | |
| Rear door hinges | |
| 4 per door | |
| Holdbacks | |
| Chain link and hook type door | |
| Rear door lock rods | |
| 1 per door | |
| Rear door panels | |
| .040" aluminum exterior panel | |
| Rear door type | |
| Utility-Design Barrier Door® | |
| 14 FLOORS | |
|---|---|
| Floor type | |
| 1½" extruded aluminum high wear 20K duct floor system and integral 10" heavy-duty extruded aluminum non-tapered wearband | |
| Fork lift reinforcing | |
| Bearing grid system at rear with full width hardwood fillers and aluminum I-cores rear 36" of floor in center 68"; 1 additional crossmember at rear for maximum 6" center line at rear 34" | |
| Troughs | |
| Extruded aluminum front and rear | |
| Drains | |
| 2 drains front and rear | |
| 15 INSULATION | |
| Side wall thickness | |
| 2" | |
| Front wall thickness | |
| 4" | |
| Crossmember floor fillers | |
| Full length hardwood | |
| Floor thickness | |
| 3" | |
| Floor underskin | |
| .040" Versitex® | |
| Rear door thickness | |
| 3" | |
| Roof thickness | |
| 3" | |
| 16 LINING | |
| Front wall lining | |
| .065" Versitex®-Utility VR2U | |
| Side wall lining | |
| .065" Versitex®-Utility VR2U | |
| Wearband | |
| 10" high 3⁄16" thick heavy-duty extruded aluminum non-tapered integral with floor | |
| Rear door lining | |
| .065" Versitex®-Utility VR2U | |
| Roof lining | |
| .065" Versitex®-Utility VR2U | |
| 17 ELECTRICAL | |
| Electrical receptacle | |
| 7-way without circuit breakers | |
| Main harness | |
| Utility moisture-resistant 6-wire harness with internal ground and 7-way plug | |
| Clearance lights quantity | |
| 0-1-2-5 D.O.T. minimum clearance light package | |
| Rear header clearance lights | |
| Grote® Micronova® LED grommet-mounted | |
| Upper clearance lights | |
| Factory choice LED with 3" mounting hole at center line | |
| Lower clearance lights | |
| Grote® Micronova® LED PC-rated | |
| Side mounted directional light | |
| Grote® Supernova® LED combo on bracket below bottom rail (each side) | |
| ABS warning light | |
| Grote® Micronova® LED PC-rated | |
| Stop, tail, turn lights | |
| Grote® 4" LED (10-diode) lights, 2 per side with black snap-in flange | |
| Conspicuity tape location | |
| On bottom rails and at rear | |
| 18 PAINT AND FINISH | |
| Front panel finish | |
| Pre-painted white with Ultra Road Shield™ Plus (URS+) | |
| Front corner post finish | |
| Natural aluminum | |
| Front corner post insert finish | |
| Stainless steel | |
| Front subframe assembly finish | |
| Fully immersed in black rust preventative coating (zero VOC hot dip) | |
| Side panel finish | |
| Pre-painted white with Ultra Road Shield™ Plus (URS+) | |
| Rear case finish | |
| Satin finish stainless steel | |
| Rear subframe finish | |
| Black scharpf | |
| Vertical & horizontal I.C.C. bumper finish | |
| Utility black enamel on horizontal bumper, black scharpf on vertical bumper | |
| Bottom side rail finish | |
| Natural aluminum | |
| Top front & top side rail finish | |
| Natural aluminum | |
| Roof exterior finish | |
| Natural aluminum | |
| Support leg finish | |
| Rust preventative coating | |
| 19 MISCELLANEOUS | |
|---|---|
| Mudflap type | |
| Black plastic anti-sail with Utility logo, mounted with steel reinforcing straps | |
| Side mounted aerodynamic air deflectors | |
| Advanced aerodynamic side skirt USS-120A-4 | |
| 20 TIRES AND WHEELS | |
| 22.5" × 8.25" standard width wheels | |
| Factory choice steel 10 hub piloted wheels | |
| Tires | |
| 295/75R 22.5” Michelin X®-Line Energy-T2 14ply Load Range 'G' | |