Cheetah 40' Ultralight Gooseneck Chassis

Cheetah 40' Ultralight Gooseneck Chassis

Cheetah ChassisCheetah 31' Extendable Bridgemaster HD Chassis

Chassis Specifications - Download PDF

Function Carries one 40 ft ISO Container Meets all DOT, TOFC, AAR, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States
Overall Length 40ft. 6in.
Overall Width 96 inches
Tandem Location 49 inches
Kingpin Location 24½ inches from the front (18 inches from the rear face of the front bolster).
Maximum Rear Height 48 in.
Main Frame Width 40 in.
Main Beams Fabricated I-Beam with high tensile steel flanges
Gooseneck Beams 5 ¼ inches deep fabricated I-Beam.
Cross Member All cross members are formed from 10-gauge steel
Upper Coupler Assembly Pick up plate is ¼” thick and extends approximately 18” behind the kingpin and is reinforced fore and aft by channels
Front Bolster Fabricated channel 9 inches high x 6 inches deep with stiffeners
Rear Bolster Box type with fabricated formed channel lower member
Twist Lock & Slide Pins Meets ISO standards and requirements.
ICC Bumper 4 inch x 4 inch Tube step bumper.
Landing Gear UL500 Jost two speed AAR approved, square leg. 50,000 lb. lift capacity and 140,000 static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10 in. by 10 in. Low profile sandshoe
Crank Handle Location Curb side handle
Axle Quantity Two Axles
Suspension Type Binkley Spring-Ride
Axle Centers 49 inch
Springs Mono Leaf
Hub Type Hub piloted for disc wheels
Hub Material Aluminum
Drum Centrifuse
Rim/Wheels 8 1/4 X 22.5 machine finished aluminum
Wheel/Rim Color Aluminum
Tires Cheetah supplied
Tire Size 255/70R 22.5
Tire Inflation System None
Brake Lining Options Standard
Lubrication Oil 90 wt.
Brake System Type 2S1M
Hubodometer None
Electrical System 12 volt, 7-way split pin receptacle plug; modular wiring harness
Light Attachment Flange mounted
Light Type LED
Metal Preparation Clean, dry steel and NACE No. 3 /SSPC-SP-6 “Commercial Blast Cleaning”
Primer 70% Zinc Rich Primer
Topcoat Urethane Topcoat
Color Black
Markings FHWA plate, tare weight, 2 small Cheetah logos.
Customer Decals Furnished by Customer
Conspicuity Meets DOT requirements
Registration Holder Plastic with clear screw on top
Mud Flaps Plastic anti sail
Steel & Fasteners All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated
GVWR 65,000 lbs
Weight Approximately 5,150 lbs.

BACK TO CHEETAH MAIN PAGE