Cheetah 40' Gooseneck Chassis

Cheetah 40' Gooseneck Chassis

Cheetah ChassisCheetah 40' Gooseneck 2-Axle Chassis

40' Gooseneck 2-Axle Chassis Specifications

Simple but effective, the 40’ gooseneck container chassis is capable of hauling a 40’ ISO container with a GVWR of 75,000 lbs. This model is the workhorse standard of chassis fleets throughout the United States.
 
This gooseneck container chassis is assembled in the USA, featuring state-of-the-art fabrication, welding, and paint systems.

Call Utility Keystone Trailer Sales for more information.
GENERAL SPECS
Tare Weight: Approximately 6,400 lb.
GVWR: 75,000 lb.
Steel & Fasteners: All structural steel is ASTM-A572, Grade 50, or ASTM-A607, Grade 50 or better. All structural fasteners are Grade 5 or better and are zinc coated
Main Beams: Wide flange I-Beam 12" deep, 19 lb./ft.
Cross Member: All cross members fabricated with 10-gauge steel
Upper Coupler Assembly: 5/16" thick pick-up plate
Fifth Wheel Height: 48 inches
Front Bolster: Fabricated 7.75" tall × 7.375" wide channel with steel casting end plates
Rear Bolster: Channel type
ICC Bumper: 47" long tube
Mud Flaps:
24" × 30" white plastic, 4 hole mounting
Electrical System: 12 volt, 7-way split pin receptacle plug; modular wiring harness
DIMENSIONS
 Overall Chassis Width:  96 inches
 Maximum Rear Height:  48 inches
Overall Chassis Length: 40.61 feet
LANDING GEAR
Landing Gear: Two speed AAR approved, square leg. 55,000 lb. lift capacity and 160,000 lb. static load capacity.
Landing Gear Foot Group: 10" × 10" low profile sandshoe
Crank Handle Location Roadside
LIGHTING
Light Attachment: Flange mounted
Light Type:  LED
BRAKES
Drum:  Steel outboard mounted
Lubrication: Grease Synthetic
Brake System Type: 2S1M
Brake Chambers: 30/30
WHEELS
Rims:  8.25" × 22.5" hub piloted tubeless
Tire Size: 11R 22.5
Hub Type: Steel
AXLES
Axle Quantity:  Two
Axle Centers:  49 inches
Tandem Location: 50 inches from rear
Kingpin Location: 30 inches from rear face of front bolster.
SUSPENSION
Suspension Type:
Three-leaf spring ride
FINISH
Metal Preparation: Clean, dry steel and NACE No. 3 /SSPC-SP-6 commercial blast cleaning
Primer: Zinc-rich primer
Topcoat: Black urethane

BACK TO CHEETAH MAIN PAGE