Cheetah 31' Extendable Bridgemaster HD Chassis

Cheetah 31' Extendable Bridgemaster HD Chassis

Cheetah ChassisCheetah 31' Extendable Bridgemaster HD Chassis

Chassis Specifications - Download PDF

Function Carries one 20 ft. ISO container. Meets all DOT, FMVSS, ANSI, SAE and TTMA specifications in effect at the time of manufacture and applicable to operation in the United States.
Frame Rating Maximum container and payload weight of 60,600 lbs.
Length 40ft 11 1/2 inches open
31 ft. 5 inches closed
Width 96"
Rear Axle Location 25 1/2 inches from rear of chassis
Kingpin Height 48 inches
Kingpin Location 15 inches
Rear Height Approximately 49 1/2 inches
Landing Gear Location Minimum 139 inches from king pin to center of landing gear leg
Main Beams Fabricated I-Beam
Bogie Beams Fabricated I-Beam
Upper Coupler Assembly Pick up plate is 1/4” thick and is reinforced fore and aft by 1/4" formed channels
Bracing Lateral Bracing in bogie area & gooseneck
Front Bolster Fabricated
Rear Bolster Fabricated
Twist Locks & Slide Pins Meets ISO standards and requirements
Slider Mechanism Lock engagement ensured by two mechanically actuated pins through main beams. Movement is facilitated by steel rollers.
ICC Bumper None. (Meets the DOT wheels back exemption)
Landing Gear Two speed AAR approved, square leg. 50,000 lb. lift capacity and 160,000 lb. static load capacity.
Landing Gear Axle Type Standard
Landing Gear Foot Group 10" x 10" Low profile sandshoe
Crank Handle Location Road side handle
Axles Three (3) axles
Axle Centers 122 in. over 3 axles
Suspension Spring Ride
Springs Two Leaf
Hub Type Hub piloted for disc wheels
Hub Material Steel
Drum Outboard mounted
Rims/Wheel 8.25 X 22.5 hub piloted tubeless
Wheel/Rim Color White
Tires Cheetah Supplied
Tire Size 11R 22.5
Tire Inflation System None
Brake Lining Options Standard
Lubrication Oil 90 wt.
Brake System Type 4S2M
Brake Chambers 30 /30
Slack Adjusters Automatic
Hubodometer None

BACK TO CHEETAH MAIN PAGE