23.5' Extendable Chassis
The 23.5' Slider Chassis is the standard model throughout the United States for carrying 20' ISO containers. The 44" sliding bogie provides greater carrying capacity under federal bridge law regulations.
This extendable container chassis is assembled in the USA and built to last, featuring state-of-the-art fabrication, welding, and paint systems.
| Function | Carries one 20 ft. ISO container. Meets all DOT and FMVSS regulations in effect at the time of manufacture and applicable to operation in the United States |
| Frame Rating | Maximum container and payload weight of 54,000lbs. |
| Length |
26' 11" extended 23' 3" closed |
| Width |
96" |
| Kingpin Location | 15" from front of chassis |
| Tandem Location | 49" |
| Main Beams | Wide flange I-beam 12" deep, 19lb/ft, hot rolled steel, ASTM A572-50 |
| Slide Range | 44" |
| Upper Coupler Assembly | 5/16" pick up plate |
| Cross Members | All cross members are formed from 10-gauge steel. |
| Front Bolster | Box type with 3/8" x 8" top plate and 1/4" thick, formed channel lower member. |
| Rear Bolster | Box type with 3/8" x 8" top plate and 1/4" thick, formed channel lower member. |
| Twist Locks & Slide Pins | Meets ISO standards and requirements |
| Slider Mechanism | Lock engagement ensured by two spring-loaded pins through main beams. A weld washer secured polyethylene slide pad facilitates sliding. Automatic trip activated locking pin. |
| ICC Bumper | 4" x 4" x 3/16" tube step bumper. |
| Landing Gear | Two speed, AAR approved, square leg. 50,000lb lift capacity and 160,000lb static load capacity. |
| Landing Gear Axle Type | Standard |
| Landing Gear Foot Group | 10" x 10" Low profile sandshoe |
| Crank Handle Location | curbside handle |
| Axles | Two |
| Axle Centers | 49" |
| Suspension | Spring Ride |
| Springs | Three leaf. |
| Hub & Drum | Steel hub piloted for disc wheels. Outboard mounted drum. |
| Rims/Wheel | 8-1/4" x 22-1/2" hub piloted tubeless |
| Wheel/Rim Color | White |
| Tires | Cheetah Supplied |
| Tire Size | 11R 22.5 |
| Tire Inflation System | None; Axles are drilled and tapped for PSI. |
| Brake Lining Options | Standard |
| Lubrication | Synthetic Grease |
| Brake System Type | 2S1M |
| Brake Chambers | 30 /30 |
| Slack Adjusters | Automatic |
| Hubodometer | None |